ENGINE OIL FILTER (for Diesel, Petrol, CNG)
Wiramas oil filter technology offers 4 different sizes of Oil filter units, ranging from the FS-50 to FS-4000, for which applications works for both petrol and diesel based engines, where applications include heavy earth moving equipment and large fishing vessels. The unit size for a particular application is determined by oil sump capacity, or in the case of hydraulic applications, by the hydraulic oil system capacity. For direct hydraulic oil cleaning, we do provide the service of cleaning the contamination and water removal, do read more from our services page.
FS 50
The FS 50 is our smallest oil filter designed to clean an engine with an oil sump capacity of up to 20 litres, or 50 litres of hydraulic oil. Typical applications include saloon cars, small trucks and small generators etc.
FS 200
The FS 200 can clean up to 50 litres of engine lubricating oil, or 200 litres of hydraulic oil. Typical applications include small buses, midsize trucks, generators and yacht engines etc.
FS 2000
The FS 2000 can clean up to 120 litres of engine lubricating oil, or 2000 litres of hydraulic oil. Typical applications include buses, generators, trucks, prime movers and marine engines etc
FS 4000
The FS 4000 is the largest system in the range. It can clean up to 300 litres of engine lubricating oil, or 4000 litres of hydraulic oil. Typical applications include turbine engines, marine engines, mining machineries and generators etc. The system can be connected in parallel to increase the oil cleaning capacity.
GLW Engine Oil Filter is distributed in Malaysia by Wiramas Makmur Sdn. Bhd.
FUEL FILTER (for Diesel & BioDiesel (B20) Treatment)
PRODUCT NUMBER: FP 50
PRODUCT DESCRIPTION:
The RCI Technologies patented fuel filter is a one-step unit that removes up to 99.8% of free water and up to 95% of other heavy contaminants that are found in diesel fuel. Even today’s “clean” diesel fuel will easily become contaminated during transportation and storage. Unlike many other products on the market, the RCI Technologies fuel purifier performs this function without the use of a replaceable, changeable, or cleanable filter element or cartridge. By removing contamination immediately before the fuel enters the engine’s filter system, you can keep your fuel clean, preserve fuel quality, and extend the life of your equipment.
The FP 50 is designed for small to midsize marine, automotive, and construction equipment. This unit is fully baffled and provides excellent protection for both gas and diesel off-road, sport and marine applications.
In light of the current national B20 biodiesel programme in the transportation sector, Wiramas Makmur is pleased to introduce a filter-less Fuel Filter that can address the cleanliness and purity of biodiesel (B20) whereby:
1) the characteristic of easily absorbing moisture from the environment, or what is also called hygroscopic.
2) With excessive water content, it will lower the energy content of biodiesel (B20) when compared with petroleum diesel
3) With excessive water content, the phenomenon also affects engine startup, operation (incomplete combustion) and subsequent durability, if not managed well
Diagram 1.0 Typical implementation of RCI Fuel Filter
The RCI fuel filter, once installed, requires no maintenance other than periodic purging of water and other contaminants from the fuel purifier system.
Heater Element & Water Sensor Kit